Suzhou Force Lubricants Ltd. official website!

CN | RSS | XML
苏州线切割削油

News classification

Product classification

Contact us

Suzhou Force Lubricant Co., Ltd.

Contact : Mr. Cui

Mobile : 13222983168

Tel       : 4001698568

                0512-66195968

Q   Q   :1732830322

Web    : www.fwsoil.com

Address : Wuzhong District, Suzhou City, Jiangsu Hong Fu Road straight town on the 8th


Suzhou industrial lubricant storage methods

Your current position: Home >> News >> Technology Center

Suzhou industrial lubricant storage methods

Date of release:2017-12-09 Author: Click:

With the widespread use of lubricants in various fields will see the emergence of this product, and our lives are closely related, so hope that the relevant parties to use lubricants to correctly grasp its storage.

1. On the surface, it is not easy for water to penetrate the complete lid into the oil drum, however, the oil drums stored in the outdoors are exposed to the sun during the day and the weather is cooler during the night. The thermal expansion of Suzhou Industrial Lubricant Condensed will affect the pressure of the air inside the barrel; slightly above atmospheric pressure during the day and close to vacuum at night. This change in day and night pressure will have a "breathing" effect, during the day part of the air is "exhaled" outside the barrel, the night air was "sucked" bucket, if the bucket is immersed in water, then the night will inevitably with the air moisture Into the barrel, over time, the water mixed in the oil is quite considerable.

2. When taking oil, the oil drum should be lying on a suitably suitable wooden frame, with a mixer at the lid of the pail surface to drain the oil, and a container should be placed under the tap to prevent splashing. Or insert the drum directly into the tubing through the lid of the barrel to pump the oil through the hand pump.

3. Bulk oil stored in the tank will inevitably have condensation of water and dirt incorporation, and ultimately gathered in the bottom of the tank to form a layer of sludge-like substances, so that lubricants contaminated. Therefore, the design of the bottom of the tank with butterfly butterfly or tilt appropriate, and install the drain cock to drain the residue on time. Where possible, the interior of the tank should be cleaned regularly.

4. The impact of temperature on the grease than the large, long-term exposure to high temperatures (such as: sun exposure), grease components can be separated, so grease bucket should be stored in the warehouse priority, barrel mouth Vertical upright suitable. In full bloom grease barrel mouth, dirt and water more easily infiltrated, access to the lid should be immediately closed.


The address of this article:http://www.fwsoil.com/en/news/357.html

Related labels:Suzhouindustriallubricants

SERVICE
share 一键分享
Please leave a message for us
Please enter the message here and we will contact you as soon as possible.
name
name
phone
phone
mail
mail
address
address